DOOWIN water bags was engaged in Kwansoo Brunei Temburong Bridge project by Temburong bridge project package CC2 marine viaducts for 1st load test in February 2017. DOOWIN was involved in launching the gantry test and provided load test water bag service for client. Moreover, the project acquired about 12 working days along with two types of load testing were conducted which dynamic and static load tests.
The static and the dynamic pile testing methods are the two main types of pile tests that are periodically used to assess the pile load capacity. The static pile load test is conducted at low strain and takes longer time than the dynamic pile load test, which is conducted at considerably higher strain.
The calibration operation of the instrument used for the inspection was satisfied and acceptable. BV inspector, through the inspection of open top water bags value that has been recorded during inspection found the result was acceptable and there was no defect found during visual inspection.
DOOWIN provides an extensive range of specialist water bags or water tank, which are specially designed for the testing all kinds of load-bearing structures, including bridges, elevators, ramps, gangways, decks and entire buildings.
© 2015 DOOWIN Rubber and Plastic. All rights reserved.